Sheaves

Sheaves are used in short and/or low loaded conveyors instead of terminal drums. Sheaves are mounted on standard shafts in both drive and tension ends. With sheaves is it also possible to track steel belts with a true-tracking rope (V-rope). The tension in the belt is limited by the sheaves to 7 MPa and the pulling force must not exceed 2 500 N for grooved sheaves and 1 250 N for other rim designs.

Product information sheaves (PDF-document, 109 kB)
Interactive 3D-drawings (PDF-document, 163 kB)

Sheaves for end stations, casted aluminum
Sheave/hub diameter, mm	300/25 to 900/120
Periphery design	Flat; flat and chamfered; groove for v-rope
Note: Sheaves with flat periphery can not work together with sheaves with groove for V-ropes
	CAD-file
Product code	CP30-xxx flat (ZIP-document, 2,7 MB) (Compressed files-document, 2,7 MB) CP31-xxx flat and chamfered (ZIP-document, 2,8 MB) (Compressed files-document, 2,8 MB) CP32-xxx groove for v-rope, Dia 300-800 (ZIP-document, 6,7 MB) (Compressed files-document, 6,7 MB) CP32-xxx groove for v-rope, Dia 900-1200 (ZIP-document, 1,4 MB) (Compressed files-document, 1,4 MB) CP32-xxx groove for v-rope, with v-rop, Dia 300-800 (ZIP-document, 5,5 MB) (Compressed files-document, 5,5 MB) CP32-xxx groove for v-rope, with v-rop, Dia 900-1200 (ZIP-document, 2,2 MB) (Compressed files-document, 2,2 MB)
Product name	Sheaves for end stations
Delivery time	6 weeks